Table 34 Other function (continued)
Audit Log OutputGUI operation
Operation NameFunction
Name
DescriptionSubmenu
Set Open Cache Residency (Note 1) (Note
2)
Perf MonSet Cache Residency (Open Volume)Cache Residency
Set M/F Cache Residency (Note 1) (Note
2)
Perf MonSet Cache Residency (M/F Volume)
Delete Open Cache Residency (Note 1)
(Note 2)
Perf MonRelease Cache Residency (Open
Volume)
Delete M/F Cache Residency (Note 1)
(Note 2)
Perf MonRelease Cache Residency (M/F
Volume)
Cache Residency Prestaging (Note 1)
The log information is output at the end, no
matter when you perform the Cache
Residency operation.
Perf MonPrestaging ON
LUNM Operation
The log information is not output in case of
the format violation and inconsistency of
configuration.
SpreadsheetUploadConfiguration File
Loader
Note 1: When you apply two or more settings of the same type to the storage system at the same
time, the log information is output as one entry.
Note 2: If one or more settings end abnormally when you have applied at one time, the output
log information is Error, not Warning.
Using Reports menu
Table 35 Task Management
Audit Log OutputGUI operation
Operation NameFunction NameDescriptionSubmenu
Delete TasksBASEDeleting a taskDelete Tasks
Resume TasksBASEResuming a taskResume Tasks
Suspend TasksBASESuspending a taskSuspend Tasks
Disable Auto DeleteBASEDisabling Task Auto Delete
function
Disable Auto Delete
Enable Auto DeleteBASEEnabling Task Auto Delete
function
Enable Auto Delete
Table 36 Configuration Report
Audit Log OutputGUI operation
Operation NameFunction NameDescriptionSubmenu
Create Conf ReportBASECreating a configuration reportCreate Configuration
Report
Delete ReportsBASEDeleting a configuration reportDelete Reports
208 Audit log user operations
To Next Page
Loading...
Need help?
General