HP StorageWorks P9000 - Disk Arrays Reference Guide

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Delete WWN,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,WWN}
=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX},{XX,0xXXX,0xXXXXXXXXXXXXXXXX}],
Num. of WWNs=2
Detailed Information
DescriptionItem
The name of the port where the host deleted from host group was connected.Port
The host group number where the host is deleted.HostGrpID
Indicates WWN of the host deleted from the host group.WWN
The number of hosts (WWN) deleted from the host group.Num. of WWNs
[PROV] DRU Expiration-Lock
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],DRU Expiration-Lock,SYSTEM:Enable,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
DescriptionParameter
The expiration-lock setting is enabled in the storage system.SYSTEM:Enable
The expiration-lock setting is disabled in the storage system.SYSTEM:Disable
[PROV] Edit Cmd Dev(Auth)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Cmd Dev(Auth),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,UserAuth}=[{0xXX:0xXX:0xXX,Disable},
{0xXX:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device
authentication setting is changed.
LDKC:CU:LDEV
Indicates whether the command device authentication setting is enabled or disabled.
Disable or Enable will appear.
UserAuth
The number of logical volumes where the command device authentication setting is changed.Num. of LDEVs
108 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English