HP StorageWorks P9000 - Disk Arrays Reference Guide

[PROV] Set FCSP Host
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Host,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Kind,UserName,Change UserName}
=[{1E,0xXXX,Add,1111111111111111,-},
{3E,0xXXX,Change,2222222222222222,3333333333333333},
{5E,0xXXX,Delete,4444444444444444,-}],Num. of Info=3
Detailed Information
DescriptionItem
The name of the port that includes the host group where user name has been set.Port
The number of the host group where user name has been set.HostGrpID
The setting status of the user name that is registered to the host group.
Add: Add user name, Change: Change user name, Delete: Delete user name.
Kind
The user name added or deleted when Kind is Add or Delete. The user name before change
when Kind is Change.
UserName
The user name after change when Kind is Change. Indicates a dash (-) when Kind is Add or
Delete.
Change UserName
The number of added, changed or deleted user names.Num. of Info
[PROV] Set FCSP Port Info
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Port Info,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Auth_TOV,Reject Time,Reject Count}
=[{1E,45,3,3},{3E,60,1,10}],Num. of Ports=2
Detailed Information
DescriptionItem
The name of the port where authentication parameter has been set.Port
The time to execute authentication after the failure of port authentication. The unit is second.Auth_TOV
The period of time to reject authentication when port authentication have failed. The unit is
minute.
Reject Time
The number of authentication failures allowed before port authentication is rejected.Reject Count
The number of ports where authentication parameter has been set.Num. of Ports
[PROV] Set FCSP Port Switch
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Port Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch,DH Group,Auth,UserName}
=[{1E,Enable,0,bi-directional,1111111111111111},
Provisioning Descriptions 127

HP StorageWorks P9000 - Disk Arrays Specifications

General

Form Factor	Rack-mountable
Model	HP StorageWorks P9000
Type	Disk Array
Category	Storage
Drive Type	SSD, SAS
RAID Levels	RAID 0, 1, 5, 6, 10
Host Interface	Fibre Channel, FCoE, iSCSI
Connectivity	Fibre Channel, FCoE, iSCSI
Cache Memory	Up to 512 GB
Controllers	Dual controllers
Management Software	HP StorageWorks Command View
Redundancy	controllers, power supplies, and fans
Operating Humidity	20 to 80% relative humidity, non-condensing