Table 14 Host mode option 64 to 95 and output contents of Option[64:95]
Value of Option[64:95]Host mode optionValue of Option[64:95]Host mode option
0x00008000800x8000000064
0x00004000810x4000000065
0x00002000820x2000000066
0x00001000830x1000000067
0x00000800840x0800000068
0x00000400850x0400000069
0x00000200860x0200000070
0x00000100870x0100000071
0x00000080880x0080000072
0x00000040890x0040000073
0x00000020900x0020000074
0x00000010910x0010000075
0x00000008920x0008000076
0x00000004930x0004000077
0x00000002940x0002000078
0x00000001950x0001000079
NOTE: When more than one option is set, a logical addition of their values is output. For example,
0x200C0000 is output to Option[0:31], it means the host mode options [2] , [12], and [13] are
set.
[PROV] Edit Host Grps(Name)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Host Grps(Name),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,HostGrpName}
=[{XX,0xXXX,XXXXXXXXXXXXXXXX},{XX,0xXXX,XXXXXXXXXXXXXXXX}],
Num. of Host Groups=2
Detailed Information
DescriptionItem
The name of the port where the host group is created.Port
The host group number where the host group names have been changed.HostGrpID
The name of the host group. If the name is changed, the name after change is indicated.HostGrpName
The number of host groups where the settings have been changed.Num. of Host Groups
Provisioning Descriptions 113
To Next Page
Loading...
Need help?
General