HP StorageWorks P9000 - Disk Arrays Reference Guide

Copy Pace,Priority,Diff,Result}=
[{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Sync,Entire,
Never,15,032,Auto,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
DescriptionItem
The port number, host group number, and LUN of the volume specified to the primary
volume when the pair is created sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the volume specified to the secondary
volume when the pair is created sequentially.
S-VOL(Port-G-ID-LUN)
The serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
The path group ID or SSID.
When the path group ID is default setting, the output is “Default.”
ID
The controller ID.Controller ID
The update copy mode set.
Sync: Synchronous mode
Type
The initial copy mode set.
Entire: Copy all, None: Do not copy
Initial Copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at one time).Copy Pace
The priority of the set initial copy operation (scheduling order).Priority
The unit of the differential management set.
Auto, Cylinder, Track
Diff
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairs.Num. of Pairs
[Cnt Ac-S] Pairresync
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Pairresync,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
Fence Level,Copy Pace,Priority,Result}=
[{1A-0x00-0x000,1B-0x00-0x000,Never,15,256,Normal end},
{1A-0x00-0x001,1B-0x00-0x001,Never,15,256,Normal end},(snip)
-(snip)],Num. of Pairs=xx
150 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English