HP StorageWorks P9000 - Disk Arrays Reference Guide

[Perf Mon] Edit WWN
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Update Mode,HBA WWN,Change WWN Name,Change HBA WWN}
=[{Change HBA WWN,0xXXXXXXXXXXXXXXXX,,0xXXXXXXXXXXXXXXXX},
{Change WWN Name,0xXXXXXXXXXXXXXXXX,
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,}],Num. of WWNs=2
Detailed Information
DescriptionItem
The changing mode of WWN.
Change HBA WWN: Change of HBA WWN, Change WWN Name: Change of WWN name.
Update Mode
The name of HBA WWN.HBA WWN
The changed WWN Name (if changed).Change WWN
Name
The name of changed HBA WWN.Change HBA WWN
The number of changed WWNs.Num. of WWNs
[Perf Mon] Edit WWN MonitorMode
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit WWN MonitorMode,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Perf Mon] Set M/F Cache Residency
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Mon],Set M/F Cache Residency,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Mode,Prestaging,Start CC-HH,End CC-HH}
=[{0x00:0x00:0x00,Bind,No,XXXXXX-XX,XXXXXX-XX},
{0x00:0x00:0x00,Priority,Yes,XXXXXX-XX,XXXXXX-XX}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where the
setting information of Cache Residency cache is added or changed.
LDKC:CU:LDEV
The setting mode of Cache Residency cache.
Bind: Bind, Priority: Priority
Mode
The prestaging target.
No: No (disables the prestaging mode) Yes: Yes (enables the prestaging mode)
Prestaging
The starting cylinder number (CC) and the starting head number (HH) of the data resident in
Cache Residency cache.
Start CC-HH
94 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English