[Install] Open Cache Residency
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Open Cache Residency,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}
=[{Set,Bind,No,0,2015},{Set,Priority,Yes,3636,4175},
{Delete,-,-,3636,4175}],Num. of Cache Residency Settings=3
Detailed Information
DescriptionItem
The LDKC number, the CU number, and the LDEV number of the logical volume (for an open
system) where Cache Residency is set.
LDKC:CU:LDEV
The setting status of Cache Residency.
Set: set, Delete: cancel
Define
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.
Bind: Bind mode, Priority: Priority mode
Mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-) when
Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
Prestaging
The starting LBA number of the data which Cache Residency was set or canceled.Start LBA
The ending LBA number of the data which Cache Residency was set or canceled.End LBA
The number of Cache Residencies set or canceled.Num. of Cache
Residency Settings
[Install] Release LUSE
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Release LUSE,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LUSE(LDKC:CU:LDEV)=[0x00:0x00:0x00,0x00:0x01:0x00],
Num. of LUSEs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the top LDEV where LUSE volumes are released.LUSE(LDKC:CU:LDEV)
The number of LUSE volumes released.Num. of LUSEs
[Install] Remove
Example 1: removing a channel adapter (CHA)
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CHA,Kind}
72 Audit log examples
To Next Page
Loading...
Need help?
General