=[{CHA-1EU,16FC (Fibre )},{CHA-2QU,16FC (Fibre )}],
Num. of CHAs=2
Detailed Information for Example 1
DescriptionItem
The Channel Adapter (CHA) mounting location.Channel Adapter
(CHA)
The kind of PCB mounted.Kind
The number of Channel Adapter (CHA)s.Num. of Channel
Adapter (CHA)s
Example 2: removing a Disk Adapter (DKA), an ECC Group or an LDEV
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKA,Kind}=[{DKA-1AL,DKF 4MP},{DKA-1LL,DKF 4MP},
{DKA-2ML,DKF 4MP},{DKA-2XL,DKF 4MP}],Num. of DKAs=4
+DKU=[DKU-01],Num. of DKUs=1
+PG=[1-6,1-7],Num. of PGs=2
+{B4,SPARE}=[{1,1}],Num. of SPAREs=1
Detailed Information for Example 2
DescriptionItem
The Disk Adapter (DKA) mounting location.Disk Adapter (DKA)
The type of Disk Adapter (DKA).Kind
The number of Disk Adapter (DKA)s.Num. of Disk Adapter
(DKA)s
The Disk Adapter (DKA) mounting location.Disk Unit (DKU)
The number of subsystems.Num. of Disk Unit
(DKU)s
The parity group number.PG
The number of parity groups.Num. of PGs
The B4 number.B4
The spare drive number.SPARE
The number of spare drives.Num. of SPAREs
Note: Only the changed items will be output. The Detailed Information of the recovery process will not be output when
the removing process executed before the process has completed. However, the setting of the recovery process will
be output as the Detailed Information of the process when the removing process executed before the recovery process
has not completed.
Example 3: removing a cache memory module
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CM,CMG,size,SSD0,SSD1)}
=[{1CA/2CC,C16G,16384,BM64(64GB),0},{1CB/2CD,C16G,16384,
BM64(64GB),0},{1CE/2CG,C16G,16384,BM64(64GB),BM64(64GB)},
{1CF/2CH,C16G,16384,BM64(64GB),BM128(128GB)}],
Num. of CMs=4
[Install] Cache Residency Prestaging 73
To Next Page
Loading...
Need help?
General