DescriptionItem
Indicates the operation mode when Delta resync operation have failed.
Entire: Copy the entire data volume, None: Do not copy the data volume
Delta resync Failure
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mirrors.Num. of Mirrors
[Cnt Ac-J] Journal-Vol
Example 1: Adding journal volumes
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Journal-Vol,Add,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,2DC Cascade}={0x00,0x001,No}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD7:0x01,Normal end},
{0x00:0xD7:0x03,Normal end},{0x00:0xD7:0x05,Normal end}]
+{LDKC,JNL,2DC Cascade}={0x00,0x002,No}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD8:0x21,Normal end},
{0x00:0xD8:0x23,Normal end},{0x00:0xD8:0x25,Normal end}]
+Num. of JNLs=2
Example 2: Deleting journal volumes
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],Journal-Vol,Delete,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL}={0x00,0x001}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD7:0x01,Normal end},
{0x00:0xD7:0x03,Normal end},{0x00:0xD7:0x05,Normal end}]
+{LDKC,JNL}={0x00,0x002}
++{LDKC:CU:LDEV,Result}=[{0x00:0xD8:0x21,Normal end},
{0x00:0xD8:0x23,Normal end},{0x00:0xD8:0x25,Normal end}]
+Num. of JNLs=2
Basic Information
DescriptionParameter
The journal volume is added.Add
The journal volume is deleted.Delete
Detailed Information
DescriptionItem
The LDKC number of the journal.LDKC
The journal number.JNL
Indicates if the journal supports 2DC Cascade.No: Not supported, Yes: Supported2DC Cascade
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
Continuous Access Journal Descriptions 159
To Next Page
Loading...
Need help?
General