HP StorageWorks P9000 - Disk Arrays Reference Guide

[Auto LUN] Set Reserved Vol
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Auto LUN],Set Reserved Vol,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Set,LDKC:CU:LDEV,Result}
=[{Reserved,0x00:0x00:0x00,Normal end},
{Reserved,0x00:0x00:0x01,Normal end},
{Reserved,0x00:0x00:0x02,Normal end},
{Reserved,0x00:0x00:0x03,Normal end},
{Reserved,0x00:0x00:0x04,Normal end},
{Reserved,0x00:0x00:0x05,Normal end},
{Reserved,0x00:0x00:0x06,Normal end}],Num. of LDEVs = 7
Detailed Information
DescriptionItem
The operation executed to the logical volume.
Normal: Set to the normal volume
Reserved: Set to the reserved volume of Auto LUN
Set
The ID of the logical volume which the setting is changed. The number on the left of the colon
is an LDKC number, the number between the colons is a CU number, and the number on the
right of the colon is an LDEV number
LDKC:CU:LDEV
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed
xxxx: Part code, yyyyy: Error code
Result
The number of logical volumes which the setting is changed.Num. of LDEVs
Cache Partition Descriptions
[CPart] Edit CLPR
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[CPart],Edit CLPR,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Delete CLPR=[01],Num.of CLPRs=1
+CLPR=00:CLPR0,Cache(MB)=15360,Cache Residency(MB)=0,
Num. of Cache Residency Areas=16384
++PG=[1-1,1-2,1-3,1-4],Num. of PGs=4
+Num. of CLPRs=1
Detailed Information
DescriptionItem
The deleted CLPR number.Delete CLPR
The number of deleted CLPRs.Num. of CLPRs
The CLPR number and the CLPR name.CLPR
The cache capacity set. The unit is megabyte (MB).Cache(MB)
The Cache Residency capacity set. The unit is megabyte (MB).Cache
Residency(MB)
186 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English