[Cnt Ac-J] System-Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J],System-Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Max Initial Copy=64
Detailed Information
DescriptionIndex
Indicates the number of volumes copiable at a time by one initial copy.Max Initial Copy
Continuous Access Journal Z Descriptions
[Cnt Ac-J Z] Add-Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Add-Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,
Priority,Initial Copy,M-JNL,R-JNL,Path Gr.ID,Error Level,CFW,
Result}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,32,Entire,
0x002,0x000, Default,Mirror,Copy to S-VOL,Normal end},
{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,32,Entire,0x002,
0x000, Default,Mirror,Copy to S-VOL,Normal end}],Num. of Pairs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume.S-VOL(LDKC:CU:LDEV)
The mirror ID.MirrorID
The serial number of the logical device (storage system).S/N
The controller ID.CTRLID
The priority of the copy.Priority
Indicates whether initial copy or paircreate operation for Delta resync is executed or
not.
Entire: execute initial copy, None: do not execute initial copy, Delta: execute paircreate
operation for Delta resync
Initial Copy
The master journal number.M-JNL
The restore journal number.R-JNL
The path group ID (Default fixed) set for the storage system.Path Gr.ID
The error level: Mirror: Mirror level, Volume: Volume levelError Level
Indicates whether the cache-fast-write data is copied to the secondary data volume is
enabled or not.
Only P-VOL: Not copied, Copy to S-VOL: Copied
CFW
Continuous Access Journal Z Descriptions 165
To Next Page
Loading...
Need help?
General