HP StorageWorks P9000 - Disk Arrays Reference Guide

+{LDKC:CU:LDEV,CommandDev}
=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled.
Disable or Enable will appear.
CommandDev
The number of logical volumes where the command device is set.Num. of LDEVs
[PROV] Set CommandDevSec
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}
=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled.
Disable or Enable will appear.
CommandDevSec
The number of logical volumes where the command device is set.Num. of LDEVs
[PROVl] Set DevGrpDef
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume where the device group definition is specified.LDKC:CU:LDEV
Indicates whether the device group definition is enabled or disabled.
Disable or Enable will appear.
UserAuth
The number of logical volumes where the device group definition is set.Num. of LDEVs
126 Audit log examples

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English