EasyManuals Logo

HP StorageWorks P9000 - Disk Arrays Reference Guide

HP StorageWorks P9000 - Disk Arrays
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed Information
DescriptionItem
The name of the port where the topology of Fibre Channel is set.Port
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
Fabric
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Connection
The number of ports where the topology of Fibre Channel is set.Num. of Ports
[Install] Set Host Mode
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Host Mode,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}
=[{XX,0xXXX,0x00,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX},
{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],
Num. of Host Groups=2
Detailed Information
DescriptionItem
The name of the port where the host group is created.Port
The host group number.HostGrpID
The host mode set. Please see the HP StorageWorks P9000 Provisioning for Open Systems User
Guide for the meaning of the host mode number.
Mode
The specified host mode option. 96 host mode options from 0 to 95 are output in groups of 32
options. Please see Table 12 (page 111) to Table 14 (page 113) for the relation of output values
and host mode option.
Please see the HP StorageWorks P9000 Provisioning for Open Systems User Guide for the
meaning of the host mode number.
Option[0:31]
Option[32:63]
Option[64:95]
The number of host groups that the host mode setting is changed.Num. of Host Groups
[Install] Set IP Address
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set IP Address,SVP&DKC,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Set IP Address,SVP&DKC,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx+{IPAddress,Subnet Mask}
={(123.456.789.123),(255.255.255.255)}+Use
Duplex=Valid+Svp Kind=Master SVP+IPv4=Valid+IPv6=Valid+{M-SVP
IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((111.222.333.444),(255.255.255.255)),
((1111:2222:3333:4444:5555:6666:7777:8888),(64))}+{S-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
[Install] Cache Residency Prestaging 79

Table of Contents

Other manuals for HP StorageWorks P9000 - Disk Arrays

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks P9000 - Disk Arrays and is the answer not in the manual?

HP StorageWorks P9000 - Disk Arrays Specifications

General IconGeneral
BrandHP
ModelStorageWorks P9000 - Disk Arrays
CategoryStorage
LanguageEnglish

Related product manuals