10
GPS OPERATION
10-15
3. Entering the GPS Memory date
!2 Push D-pad() to select “DATE,” and then push D-
pad(Ent).
• The date edit screen is displayed.
!3 Rotate [DIAL] to edit the date.
• A date between 2000/01/02 to 2099/12/30 can be en-
tered.
!4 Push D-pad() to move the cursor forward or back-
ward to select and edit the year, month or day.
!5 Repeat steps !3 and !4 to enter a GPS Memory
date.
!6 After entering, push D-pad(Ent).
4. Entering the GPS memory time
!7 Push D-pad() to select “TIME,” and then push D-
pad(Ent).
• The time edit screen is displayed.
!8 Rotate [DIAL] to edit the time.
• A time between 00:00:00 to 23:59:59 can be entered.
!9 Push D-pad() to move the cursor forward or back-
ward to select and edit the hour, minute or second.
@0 Repeat steps !8 and !9 to enter GPS Memory time.
@1 After entering, push D-pad(Ent).
5. Entering the GPS latitude
@2 Push D-pad() to select “LATITUDE,” and then push
D-pad(Ent).
• The latitude edit screen is displayed.
@3 Rotate [DIAL] to edit the latitude.
• A latitude between 0°00.00' to 90°00.00' can be entered.
If "ddd°mm'ss"" is selected in the Latitude/Longitude
screen, between 0°00'00" to 90°00'00" can be entered.
(MENU > Display > Display Unit > Latitude/Longitude)
@4 Push D-pad() to move the cursor to forward or
backward to select and edit degrees or decimal min-
utes.
@5 Repeat steps @3 and @4 to enter a GPS Memory lati-
tude.
• Select “N” to enter a north latitude, and “S” to enter a
south latitude.
@6 After entering, push D-pad(Ent).
■ GPS memory operation (Continued)
☞ Continued on the next page
To Next Page
Loading...
