Icom ID-51A User Manual

14
PRIORITY WATCH
14-11
■ VFO scan and Memory/Bank scan (Continued)
3. Start the VFO scan
q Hold down [SCAN]
for 1 second.
w Push D-pad() to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 13-5).
4. During the Priority watch
Checks the selected priority channel every 5 seconds,
while VFO scanning.
Hold down [SCAN]
for 1 second.
Push D-pad() to
select, then push
D-pad(Ent).
Blinks
Blinks
Example:
Checks the Memory channels while VFO scan-
ning
Example: Checks the Bank channels while VFO scanning
Blinks
Appears
Checks the Memory chan-
nels every 5 seconds.
Blinks
Appears
Checks the Bank channels
every 5 seconds.
Appears
Appears
NOTE: Push [CLR] to cancel the all scans at the
same time.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)