14
PRIORITY WATCH
14-12
■ VFO scan and Memory/Bank scan (Continued)
5. When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “BELL” is selected.
When a signal is received on the priority channel, a
beep sounds and the “
” icon blinks.
The VFO scan resumes.
Automatically selects the Memory channel.
Remains in the VFO mode.
Example: For a Memory scan
Blinks
Blinks
Blinks
Blinks
To Next Page
Loading...
