Lexmark CX310 - Supported paper sizes, types, and weights

3 Close the front door.
4 From the printer control panel, touch Done to clear the message and continue printing.
200 paper jam messages
Error code Description Action
200.xx A single page of media jam at the input (S2)
sensor.
Multiple pages of media are jammed at the
input sensor.
Go to
“200.xx Input (S2) sensor service check” on page 51.
200.01 The input (S2) sensor is obstructed. Go to
“200.xx Input (S2) sensor service check” on page 51.
200.02 The input (S2) sensor was made early. Go to
“200.xx Input (S2) sensor service check” on page 51.
200.03 The input (S2) sensor did not make. Go to
“200.xx Input (S2) sensor service check” on page 51.
200.05 The input (S2) sensor did not break. Go to
“200.xx Input (S2) sensor service check” on page 51.
200.20 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 102.
200.21 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 102.
200.22 The staging motor has an error. Go to
“Paper pick motor drive assembly service check” on
page 102.
201.xx A software induced stoppage has occurred.
This should not happen in the field.
POR the printer.
7527
Diagnostic information
50