Lexmark CX310 - Page 57

Error code Description Action
202.05 The exit sensor did not break. Go to
“202.xx fuser exit sensor service check” on
page 58.
202.51 The exit sensor is obstructed.
The fuser is past end of life.
Go to
“202.xx fuser exit sensor service check” on
page 58.
202.52 The exit sensor was made early.
The fuser is past end of life.
Go to
“202.xx fuser exit sensor service check” on
page 58.
202.53 The exit sensor did not make.
The fuser is past end of life.
Go to
“202.xx fuser exit sensor service check” on
page 58.
202.54 The exit sensor broke early.
The fuser is past end of life.
Go to
“202.xx fuser exit sensor service check” on
page 58.
202.55 The exit sensor did not break.
The fuser is past end of life.
Go to
“202.xx fuser exit sensor service check” on
page 58.
7527
Diagnostic information
57