5 Slide and hold the release latch on the right side of the printer, and then slowly close the top door.
6 Close the front door.
7 From the printer control panel, touch Done to clear the message and continue printing.
202 paper jam messages
Error code Description Action
202.xx A single page of media is jammed at the exit sensor.
Multiple pages of media are jammed at the exit
sensor.
Go to
“202.xx fuser exit sensor service check” on
page 58.
202.01 The exit sensor is obstructed. Go to
“202.xx fuser exit sensor service check” on
page 58.
202.02 The exit sensor was made early. Go to
“202.xx fuser exit sensor service check” on
page 58.
202.03 The exit sensor did not make. Go to
“202.xx fuser exit sensor service check” on
page 58.
202.04 The exit sensor broke early. Go to
“202.xx fuser exit sensor service check” on
page 58.
7527
Diagnostic information
56