Paper size Orientation Standard
550‑sheet tray
Multipurpose
feeder
Two‑sided
printing
Automatic
document
feeder
12x18
304.8 x 457.2 mm
(12.0 x 18.0 in.)
Short‑edge feed X ✓ ✓ X
SRA3
320.04 x 449.58 mm
(12.6 x 17.7 in.)
Short‑edge feed X ✓ ✓ X
Envelope (Choukei #3)
120 x 235 mm
(4.75 x 9.25 in.)
Short‑edge feed ✓ ✓ X X
Hagaki
100 x 148 mm
(3.94 x 5.83 in.)
Short‑edge feed ✓ ✓ X X
B5 Envelope
176 x 250 mm
(6.93 x 9.84 in.)
Short‑edge feed ✓ ✓ X X
Envelope (Commercial
#9)
98.4 x 225.4 mm
(3.875 x 8.9 in.)
Short‑edge feed ✓ ✓ X X
Envelope (Commercial
#10)
104.8 x 241.3 mm
(4.12 x 9.5 in.)
Short‑edge feed ✓ ✓ X X
Envelope (Monarch
7‑3/4)
98.4 x 190.5 mm
(3.875 x 7.5 in.)
Short‑edge feed ✓ ✓ X X
Envelope (DL)
110 x 220 mm
(4.33 x 8.66 in.)
Short‑edge feed ✓ ✓ X X
1
Supported only in some printer models.
2
Supported only when configured from the Universal Setup menu.
3
Supports paper sizes ranging from 95 x 139.7 mm (3.74 x 5.5 in.) to 297 x 355.6 mm (11.69 x 14 in.).
4
The maximum length of the universal paper size in the case of banner paper is 1320.8 x 52 in. Load only one sheet
of banner paper at a time.
5
Supports paper sizes ranging from 95 x 139.7 mm (3.74 x 5.5 in.) to 320 x 457.2 mm (12.6 x 18 in.).
6
Supports paper sizes ranging from 105 x 139.7 mm (4.13 x 5.5 in.) to 320 x 457.2 mm (12.59 x 18 in.).
7
Supports paper sizes ranging from 76.2 x 128 mm (3 x 5.04 in.) to 297 x 432 mm (11.69 x 17.01 in.).
Learn about the printer 20
To Next Page
