Lexmark CX833 - Media Configuration

Menu item Submenu item Settings Description
Configure MP N/A Cassette*
Manual
First
Determine the behavior of the multipurpose
feeder.
Notes:
• Cassette—configures the multipurpose
feeder as the automatic paper source.
• Manual—sets the multipurpose feeder only
for manual-feed print jobs.
• First—configures the multipurpose feeder
as the primary paper source.
Note: An asterisk (*) next to a value indicates the factory default setting.
Media
Configuration
Menu item Submenu item Settings Description
Units of Measure N/A Inches
Millimeters
Specify the unit of measurement for
the universal paper.
Note: Inches is the U.S. factory
default setting. Millimeters is the
international factory default setting.
Universal Setup All Input Trays Portrait Width Set the portrait width of the universal
paper.
Portrait Height Set the portrait height of the universal
paper.
Feed Direction (Short
Edge*)
Set the printer to pick paper from the
short edge or long edge direction.
Note: Long Edge appears only when
the longest edge is shorter than the
maximum width supported.
Custom Scan Sizes Scan Size Name The setting is user-
defined.
Assign a name for the custom scan.
Width 1.–8.5 inches (8.5*)
25–215.9 mm (215.9*)
Specify the width of the original
document.
Height 1–25 inches (11*)
25–635 mm (279.4*)
Specify the height of the original
document.
Orientation Portrait*
Landscape
Specify the orientation of the content
on the original document.
2 scans per side O*
On
Set the default number of scans on
each side of the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 313