Lexmark CX833 - Using the booklet finisher

Oset stacking using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the control panel, select Copy, and then specify the number of copies.
3 Select More Settings, and then select
Oset
Pages.
4 Enable the menu, and then select a setting.
5 Print the document.
Using the booklet finisher
Note: Before creating a booklet, load paper with the short edge toward the right side of the tray.
Creating a booklet using the print driver
For Windows users
1 With a document open, click File > Print.
2 Select a printer, and then click Properties, Preferences, Options, or Setup.
3 Select Booklet.
4 Click the Paper/Finishing tab, and then configure the paper settings.
5 In the Fold menu, select a setting.
6 Click OK, and then click Print.
For Macintosh users
1 With a document open, click File > Print.
2 Select a printer.
3 From the Finishing Options menu, select Apply Finishings > Printer Options.
4 Select Booklet, and then select a Fold setting.
5 Click OK.
Creating a booklet using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the control panel, select Copy, and then
configure
the settings.
3 Select More Settings, and then select Create Booklet.
4 Enable Booklet Finishing, and then select a setting.
5 Copy the document.
Printer finisher options 379