Copy
Making copies
1 Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and output have the same paper
size.
2 From the control panel, select Copy, and then specify the number of copies.
If necessary, adjust the copy settings.
3 Copy the document.
Copying photos
Copying photos
1 Place a photo on the scanner glass.
2 From the control panel, navigate to Copy > More Settings > Content > Content Type > Photo.
3 Select Content Source, and then select the setting that best matches the original photo.
4 Copy the photo.
Copying on letterhead
Copying on letterhead
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to Copy > Copy From.
3 Select the size of the original document.
4 Select Copy To, and then select the paper source that contains the letterhead.
If you loaded the letterhead into the multipurpose feeder, select Multipurpose Feeder, select a paper size,
and then select Letterhead.
5 Copy the document.
Copying on both sides of the paper
Copying on both sides of the paper
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to Copy > More Settings > Sides.
Copy 263
To Next Page
Loading...
