Lexmark CX833 - 802.1 x

Menu item Settings Description
Proposed Authentication
Method
SHA1
SHA256*
SHA512
Set the authentication method.
Note: This menu item appears only when
Base
Configuration
is set to
Compatibility.
IKE SA Lifetime (Hours) 1
2
4
8
24*
Specify the IKE SA expiry period.
Note: This menu item appears only when
Base Configuration is set to Secure.
IPSec SA Lifetime (Hours) 1
2
4
8
24*
Specify the IPSec SA expiry period.
Note: This menu item appears only when
Base
Configuration
is set to Secure.
IPSec Device Certificate default*Specify an IPSec certificate.
Note: This menu item appears only when
Enable IPSec is set to On.
Pre‑Shared Key
Authenticated
Connections
Host [x] Configure the authenticated connections
of the printer.
Note: These menu items appear only
when Enable IPSec is set to On.
Certificate Authenticated
Connections
Host [x] Address[/subnet]
Note: An asterisk (*) next to a value indicates the factory default setting.
802.1x
802.1x
Note: This menu appears only in network printers or printers that are attached to print servers.
Printer menus 359