Lexmark CX833 - Configuring Address Book; Setting up and using the accessibility features; Activating Voice Guidance

Configuring Address Book
Adding contacts
1
Open a web browser, and then type the printer IP address in the address
field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Address Book, and then click Add Contact.
3 If necessary, specify a login method to allow application access.
4 Click Save.
Adding groups
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Address Book, and then click Add Contact.
Note: You can assign one or more contacts to the group.
3 Click Save.
Setting up and using the accessibility features
Activating Voice Guidance
From the home screen
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
2 Using two fingers, touch OK.
Note: If the gesture does not work, then apply more pressure.
From the keyboard
1
Press and hold the 5 key until you hear a voice message.
2 Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
• When Voice Guidance is activated, always use two
fingers
to select any item on the display.
• Voice Guidance has limited language support.
Set up, install, and configure 67