Printer
finisher
options
Using the staple finisher
Stapling using the print driver
For Windows users
1 With a document open, click File > Print.
2 Select a printer, and then click Properties, Preferences, Options, or Setup.
3 Click Paper/Finishing, and then configure the Paper settings.
4 In the Staple menu, select a setting.
5 Click OK, and then click Print.
For Macintosh users
1 With a document open, choose File > Print.
2 Select a printer.
3 From the Finishing Options menu, select Apply Finishings > Printer Options.
4 Click Staple, and then select a setting.
5 Click Print.
Stapling using the control panel
1 From the control panel, select Print, and then select the source of the print job.
2 Select the document.
3 Select More Settings, and then select Finishing Options.
4 Select Staple, and then select a setting.
5 Print the document.
Using the staple, hole‑punch finisher
Using the staple, hole‑punch
finisher
Stapling or punching paper using the print driver
For Windows users
1 With a document open, click File > Print.
2 Select a printer, and then click Properties, Preferences, Options, or Setup.
3 Click Paper/Finishing, and then configure the Paper settings.
Printer finisher options 377
To Next Page
Loading...
