Menu item Submenu item Settings Description
H.323 Settings Gateway The setting is
user‑defined.
Specify the H.323 gateway IP address.
Gatekeeper The setting is
user‑defined.
Specify the H.323 gatekeeper.
User The setting is
user‑defined.
Specify the username used with the H.323
gateway.
Password The setting is
user‑defined.
Specify the password for the H.323 gateway.
Enable Fast Start O*
On
Enable Fast Start.
Disable H.245
Tunneling
O*
On
Disable H.323 Tunneling.
Disable Gatekeeper
Discovery
O
On*
Disable H.323 Gatekeeper Discovery.
T.38 Settings Indicator
Redundancy
0–5 (3*) Set the number of times that a fax indicator is
repeated in the T.38 communication.
Low Speed
Redundancy
0–5 (3*) Set the number of times that low speed data is
repeated in the T.38 communication.
High Speed
Redundancy
0–5 (1*) Set the number of times that high-speed data is
repeated in the T.38 communication.
Note: An asterisk (*) next to a value indicates the factory default setting.
Fax Server Setup
General Fax Settings
Menu item Settings Description
To Fo rmat N/A Specify a fax recipient.
Note: If you want to use the fax number, then type the
number sign (#) before a number.
Reply Address N/A Specify a reply address for sending fax.
Subject N/A Specify the fax subject and message.
Message N/A
Enable analog receive O*
On
Set the printer to receive analog faxes.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 330
To Next Page
Loading...
