Lexmark CX833 - Page 329

Menu item Submenu item Settings Description
SIP Settings Proxy The setting is
user‑defined.
Specify the IP address of the system that
converts the phone number to an IP address
where the fax is sent.
Registrar The setting is
user‑defined.
Specify a name or IP address of the system that
handles the registration of Session Initiation
Protocol (SIP) clients.
User The setting is
user‑defined.
Specify the name of the user for SIP.
Password The setting is
user‑defined.
Specify the password that is used in registering
with the SIP Registrar.
Auth ID The setting is
user‑defined.
The username that is used when registering.
Note: If the Auth ID setting is not set, the
setting uses the username of the User field
instead.
Transport For
Registration
UDP*
TCP
Set the SIP transport type for registration.
Transport For
Incoming Calls
UDP*
TCP
UDP And TCP
Set the SIP transport type for incoming calls.
Transport For
Outgoing Calls
UDP*
TCP
Set the SIP transport type for outgoing calls.
Outbound Proxy The setting is
user‑defined.
Specify an outbound proxy to forward all SIP
communication.
Contact The setting is
user‑defined.
Specify a contact name for SIP.
Realm The setting is
user‑defined.
Specify a realm name for SIP.
Note: If the Realm setting is not set, the setting
uses the name of the Contact instead.
SIP Registration
Status
The setting is a
read‑only
information.
Show the status of the SIP Registration.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 329