EasyManua.ls Logo

Lexmark CX833 - Configuring apps and solutions; Setting up Scan Center; Using Display Customization

Lexmark CX833
561 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printer port Function
4 EXT port
Note: Available only when a fax
card is installed.
Connect more devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax
line for the printer and if this connection method is supported in your
country or region.
5 USB printer port Connect the printer to a computer.
6 Ethernet port Connect the printer to a network.
7 Power cord socket Connect the printer to a properly grounded electrical outlet.
Configuring
apps and solutions
Setting up Scan Center
1 From the control panel, select Scan Center.
2 Select and create a destination, and then configure the settings.
Note: Only destinations created from the Embedded Web Server are saved. For more information, see
the documentation that came with the solution.
3 Scan the document.
Using Display Customization
Using Display Customization
Note: Make sure that the Screen Saver, Slideshow, and Wallpaper settings are enabled from the Embedded
Web Server. Navigate to Apps > Display Customization > Configure.
Managing screen saver and slide show images
1
In the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
You can add up to 10 images.
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloudbased
notifications.
2 Apply the changes.
Changing the wallpaper image
1
From the control panel, select Change Wallpaper.
2 Select an image to use.
3 Apply the changes.
Set up, install, and configure 65

Table of Contents

Related product manuals