Lexmark CX833 - TCP; IP

Menu item Submenu item Settings Description
PCL SmartSwitch N/A O
On*
Set the printer to switch automatically to PCL
emulation when a print job requires it,
regardless of the default printer language.
Note: When this setting is disabled, the
printer does not examine incoming data
and uses the default printer language
specified in the Setup menu.
PS SmartSwitch N/A O
On*
Set the printer to switch automatically to
PostScript emulation when a print job
requires it, regardless of the default printer
language.
Note: When this setting is disabled, the
printer does not examine incoming data
and uses the default printer language
specified in the Setup menu.
Job Buering N/A O*
On
Temporarily store jobs on the storage drive
before printing.
Note: This menu item appears only when a
storage drive is installed.
Mac Binary PS N/A Auto*
O
On
Set the printer to process Macintosh binary
PostScript emulation print jobs.
Notes:
• Auto processes print jobs from
computers using either Windows or
Macintosh operating systems.
• O filters PostScript emulation print
jobs using the standard protocol.
Energy Ecient
Ethernet
N/A On
O
Auto*
Reduce power consumption when the
printer does not receive data from the
Ethernet network.
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
Menu item Settings Description
Set Hostname The setting is user‑defined. Set the current TCP/IP host name.
Domain Name The setting is user‑defined. Set the domain name.
Allow
DHCP/BOOTP to
update NTP
server
On*
O
Allow the Dynamic Host Configuration
Protocol (DHCP) and BOOTstrap Protocol
(BOOTP) clients to update the NTP settings of
the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 355