Lexmark CX833 - Page 356

Menu item Settings Description
Zero
Configuration
Name
The setting is user‑defined. Specify a service name for the zero
configuration network.
Enable Auto IP O
On*
Assign an IP address automatically.
DNS Server
Address
The setting is user‑defined. Specify the current Domain Name System
(DNS) server address.
Backup DNS
Server Address
The setting is user‑defined. Specify the backup DNS server addresses.
Backup DNS
Server Address 2
Backup DNS
Server Address 3
Domain Search
Order
The setting is user‑defined. Specify a list of domain names to locate the
printer and its resources that reside in dierent
domains on the network.
Enable DDNS O*
On
Update the Dynamic DNS settings.
DDNS TTL The setting is user‑defined. Specify the current DDNS settings.
Default TTL
DDNS Refresh
Time
Enable mDNS O
On*
Update the multicast DNS settings.
WINS Server
Address
The setting is user‑defined. Specify a server address for Windows Internet
Name Service (WINS).
Enable BOOTP O*
On
Allow the BOOTP to assign a printer IP
address.
Restricted Server
List
The setting is user‑defined. Specify the IP addresses that are allowed to
communicate with the printer over TCP/IP.
Notes:
• Use a comma to separate each IP
address.
• You can add up to 50 IP addresses.
Restricted Server
List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
Specify the access option for IP addresses that
are not in the list.
MTU 256–1500 Ethernet (1500*) Specify a maximum transmission unit (MTU)
parameter for the TCP connections.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 356