HTTP/FTP Settings
Menu item Submenu Item Settings Description
Proxy HTPP Proxy IP Address The setting is user-
defined.
Configure the HTTP server settings.
HTTP Default IP Port The setting is user-
defined.
Configure the HTTP default IP port address.
Note: The factory default port for HTTP is
80.
FTP Proxy IP Address The setting is user-
defined.
Configure the FTP settings.
FTP Default IP Port The setting is user-
defined.
Configure the FTP default IP port address.
Note: The factory default port for HTTP is
21.
Authentication None
Auto*
Basic
Digest
NTLM
Specify the authentication credentials.
Username The setting is user-
defined.
Specify the unique username.
Password The setting is user-
defined.
Specify the unique password.
Local Domains The setting is user-
defined.
Specify domain names for HTTP and FTP
servers.
Other Settings Enable HTTP Server On*
O
Access the Embedded Web Server to
monitor and manage the printer.
Enable HTPPS On*
O
Enable Hypertext Transfer Protocol Secure
(HTTPS) to encrypt data transferring to and
from the print server.
Force HTTPS Connections On
O*
Force the printer to use HTTPS connections.
Enable FTP/TFTP On*
O
Send files using FTP/TFTP.
HTTPS Device Certificate default* View the HTTP device certificate used on
the printer.
Timeout for HTTP/FTP
Requests
1–299 seconds (30*) Specify the amount of time before the server
connection stops.
Retries for HTTP/FTP
Requests
1–299 seconds (3*) Set the number of retries to connect to the
HTTP/FTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 363
To Next Page
Loading...
