8 Turn knob N2 counterclockwise.
9 Remove the jammed paper.
Warning—Potential Damage: To prevent damage to the printer, remove any hand accessories before
removing the jammed paper.
Note: Make sure that all paper fragments are removed.
10 Put handle N1 back into place.
11 Close door F.
Paper jam in the staple, hole punch
finisher
If your printer is configured with a paper transport, then do the following:
1 Remove the jammed paper in bin 1.
Notes:
• Make sure that all paper fragments are removed.
• Do not remove the printed pages that are in the staple compiler to avoid missing pages.
Troubleshoot a problem 491
To Next Page
Loading...
