Lexmark CX833 - Printing a font sample list; Printing a directory list; Placing separator sheets in print jobs; Canceling a print job

For Macintosh users
1 With a document open, choose File > Print.
2 Select a printer.
3 From the Print Job Security drop‑down menu, enable Print with PIN, and then enter a four‑digit PIN.
4 Click Print.
5 From the printer control panel, release the print job.
a Select Held jobs, and then select the computer name.
b Select
Confidential
, and then enter the PIN.
c Select the print job, and then select Print.
Printing a font sample list
1 From the control panel, navigate to Settings > Reports > Print > Print Fonts.
2 Select the type of font.
Printing a directory list
1 From the control panel, navigate to Settings > Reports > Print.
2 Select Print Directory.
Placing separator sheets in print jobs
1 With a document open, click File > Print.
2 Select a printer, and then click Properties, Preferences, Options, or Setup.
3 Click Paper/Finishing.
4 In the Separator sheets menu, select a setting.
5 Click OK, and then click Print.
Canceling a print job
1 From the control panel, select Job Queue.
2 Select Print, and then select a job to cancel.
Note: If a document is already printing, then select Cancel job in the lower‑right corner of the display to stop
printing.
Print 261