Lexmark CX833 - Encryption; Erase Temporary Data Files; Solutions LDAP Settings; Miscellaneous

Encryption
Menu item Settings Description
Internal Storage The setting is a read‑only
information.
Show the encryption status of the internal storage.
Hard Disk The setting is a read‑only
information.
Show the encryption status of the hard disk.
Note: This menu item appears only when a hard disk is
installed.
Intelligent Storage
Drive
The setting is a read‑only
information.
Show the encryption status of the intelligent storage drive
(ISD).
Note: This menu item appears only when an ISD is installed.
Erase Temporary Data Files
Menu item Settings Description
Stored in onboard memory O*
On
Set the printer to erase all the data of a job from its memory after the
job is finished.
Stored on hard disk 1 Pass Erase*
3 Pass Erase
7 Pass Erase
Specify the method that the printer uses to erase all the data of a job
from the hard disk after the job is finished.
Note: This menu item appears only when a printer hard disk is
installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Solutions LDAP Settings
Menu item Settings Description
Follow LDAP Referrals O*
On
Search the dierent servers in the domain for the logged-in user account.
LDAP Certificate Verification Yes
No*
Enable verification of LDAP certificates.
Miscellaneous
Menu item Settings Description
Protected
Features
Show*
Hide
Show all the features that Function Access
Control (FAC) protects regardless of the
security permission that the user has.
Note: Hide displays only FAC‑protected
features that the user has access.
Print Permission O*
On
Require the user to log in before printing.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 372