Lexmark CX833 - Adjusting scanner registration; Adjusting ADF registration; Color quality problems; Modifying the colors in printed output

Adjusting scanner registration
1 From the control panel, navigate to Settings > Device > Maintenance >
Configuration
Menu > Scanner
Configuration > Scanner Manual Registration.
2 In the Print Quick Test menu, select Start.
3 Place the test page on the scanner glass, and then select Flatbed Registration.
4 In the Copy Quick Test menu, select Start.
5 Compare the test page with the original document.
Note: If the margins of the test page are
dierent
from the original document, then adjust the Left Margin
and Top Margin settings.
6 Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document.
Adjusting ADF registration
1 From the control panel, navigate to Settings > Device > Maintenance > Configuration Menu > Scanner
Configuration > Scanner Manual Registration.
2 In the Print Quick Test menu, select Start.
3 Place the test page on the ADF tray.
4 Select Front ADF Registration or Rear ADF Registration.
Notes:
• To a li gn Front ADF Registration, place the test page faceup, short edge first into the ADF.
• To a li gn Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5 In the Copy Quick Test menu, select Start.
6 Compare the test page with the original document.
Note: If the margins of the test page are
dierent
from the original document, then adjust the Horizontal
Adjust and Top Mar gin settings.
7 Repeat step 5 and step 6 until the margins of the Copy Quick Test page closely match the original document.
Color quality problems
Modifying the colors in printed output
1 From the control panel, navigate to Settings > Print > Quality > Advanced Imaging > Color Correction.
2 In the Color Correction menu, select Manual.
3 In the Color Correction Content menu, select the appropriate color conversion setting.
Troubleshoot a problem 534