Lexmark CX833 - IPSec

Menu item Submenu Item Settings Description
SNMP Version 3 Enabled O
On*
Enable the SNMP version 3 to
install and update the printer
security.
Context Name The setting is user‑defined. Enter the context name.
Set Read/Write Credentials Username
Authentication Password
Privacy Password
Enter the read and write
credentials for SNMP version
3.
Set Read‑only Credentials Username
Authentication Password
Privacy Password
Enter the read‑only
credentials for SNMP version
3.
Authentication Hash MD5
SHA1*
Set the applicable
authentication hash.
Minimum Authentication
Level
No Authentication, No
Privacy
Authentication, No Privacy
Authentication, Privacy*
Set the applicable minimum
authentication level.
Privacy Algorithm DES
AES‑128*
Set the applicable privacy
algorithm.
Note: An asterisk (*) next to a value indicates the factory default setting.
IPSec
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item Settings Description
Enable IPSec O*
On
Enable Internet Protocol Security (IPSec).
Base Configuration Default*
Compatibility
Secure
Set the IPSec base configuration.
Note: This menu item appears only when
Enable IPSec is set to On.
DH (Die‑Hellman) Group
Proposal
modp2048 (14)*
modp3072 (15)
modp4096 (16)
modp6144 (17)
Set the IPSec base configuration.
Note: This menu item appears only when
Base
Configuration
is set to
Compatibility.
Proposed Encryption
Method
3DES
AES*
Set the encryption method.
Note: This menu item appears only when
Base
Configuration
is set to
Compatibility.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 358