Menu item Settings Description
VNC Password The setting is user‑defined. Specify the password to connect to the
VNC client server.
Note: This menu item appears only if
Authentication Type is set to Standard
Authentication.
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item Submenu item Settings Description
ADF Loaded Beep N/A O
On*
Specify whether the printer
emits a custom beep when an
original document is loaded
into the ADF.
Alarm Control N/A O
Single*
Continuous
Set the number of times that
the alarm sounds when the
printer requires user
intervention.
Supplies Show Supply Estimates Show estimates*
Do not show estimates
Show the estimated status of
the supplies.
Cartridge Alarm O
Single*
Continuous
Set the number of times that
the alarm sounds when the
toner cartridge is low.
Staple Alarm O*
Single
Continuous
Set the number of times that
the alarm sounds when the
staple cartridge is empty.
Note: This menu item
appears only when a staple
finisher
is installed.
Hole Punch Alarm O*
Single
Continuous
Set the number of times that
the alarm sounds when the
hole punch container is full or
missing.
Note: This menu item
appears only when a staple,
hole punch finisher is
installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 287