For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see “Adding printers to a
computer” on page 94.
1 Load an original document into the automatic document feeder or on the scanner glass.
2 From the computer, do either of the following:
• Open Image Capture.
• Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3 From the Scanner window, do one or more of the following:
• Select the location that you want to save the scanned document.
• Select the size of the original document.
• To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
• If necessary,
configure
the scan settings.
4 Click Scan.
Scanning to an FTP server
Scanning to an FTP server
Before you begin, make sure that the printer is connected to an FTP server.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the control panel, navigate to Scan > FTP.
3 Enter the needed information, and then select Next.
If necessary,
configure
the FTP settings.
4 Scan the document.
Creating an FTP shortcut
Creating an FTP shortcut
1 From the control panel, select Scan > FTP.
2 Enter the FTP server address, and then touch .
3 Create a shortcut.
Scan 279
To Next Page
Loading...
