Lexmark CX833 - Scan job was not successful; Scanner does not close; Scanning takes too long or freezes the computer; Scanner does not respond

Scan job was not successful
Try one or more of the following:
• Make sure that the Ethernet or USB cable is securely connected to the computer and the printer.
• Check the file that you want to scan, and make sure that:
– The file name is not already used in the destination folder.
– The document or photo that you want to scan is not open in another application.
• Make sure that the Append time stamp or the Overwrite existing file check box is selected in the
destination configuration settings.
If the problem persists, then contact
customer support.
Scanner does not close
Scanner does not close
1 Remove obstructions that keep the scanner cover open.
2 Close the scanner.
If the problem persists, then contact
customer support.
Scanning takes too long or freezes the computer
Scanning takes too long or freezes the computer
1 Close all applications that are interfering with the scan.
2 Scan the document again.
If the problem persists, then contact
customer support.
Scanner does not respond
Scanner does not respond
Try one or more of the following:
• Check if the power cord is connected properly to the printer and the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power
cord to an appropriately rated and properly grounded electrical outlet that is near the product
and easily accessible.
• Check if the printer is turned on, and then resolve any error messages that appear on the display.
• Turn o the printer, wait for about 10 seconds, and then turn on the printer.
If the problem persists, then contact
customer support.
Adjusting scanner registration
Troubleshoot a problem 533