Lexmark CX833 - Share Data with Lexmark; Accessibility

Menu item Submenu item Settings Description
Timeouts Sleep Mode 1–114 minutes (15*) Set the idle time before the
printer begins operating in
Sleep Mode.
Hibernate Timeout Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days*
1 week
2 weeks
1 month
Set the time before the printer
turns o.
Hibernate Timeout on
Connection
Hibernate
Do Not Hibernate*
Set Hibernate Timeout to turn
o the printer while an active
Ethernet connection exists.
Schedule Power Modes Schedules Add New Schedule Schedule the printer when to
enter Sleep Mode or Hibernate
mode.
Note: An asterisk (*) next to a value indicates the factory default setting.
Share Data with Lexmark
Menu item Settings Description
Share Data with Lexmark Yes
No*
Send printer usage and performance information to Lexmark.
Share Data Send Time Start Time
Stop Time
Select the time window for data collection and transmission.
Note: Share Data Send Time appears only when you select Ye s in Share
Data with Lexmark.
Note: An asterisk (*) next to a value indicates the factory default setting.
Accessibility
Menu item Settings Description
Duplicate Key Strike Interval 0.00–5.00 (0.00*) Set the interval in seconds during which the printer ignores
duplicate key presses on an attached keyboard.
Key Repeat Initial Delay 0.25–5.00 (1.00*) Set the initial length of delay in seconds before a repeating
key starts repeating.
Key Repeat Rate 0.5–30.0 (30.0*) Set the number of presses per second for a repeating key.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 291