Lexmark CX833 - Page 289

Menu item Submenu item Settings Description
Email Alerts
Setup
SMTP Server
Authentication
No authentication
required*
Login/Plain
NTLM
CRAM-MD5
Digest-MD5
Kerberos 5
Set the authentication type for the SMTP
server.
Device‑Initiated Email None*
Use Device SMTP
Credentials
Set whether credentials are required for
device‑initiated emails.
User‑Initiated Email None*
Use Device SMTP
Credentials
Use Session User ID &
Password
Use Session Email
address and Password
Prompt user
Set whether credentials are required for
user‑initiated emails.
Use Active Directory
Device Credentials
On
O*
Enable user credentials and group
designations to connect to the SMTP
server.
Device Userid The setting is
user‑defined.
Specify the user ID to log in to the SMTP
server.
Device Password The setting is
user‑defined.
Specify the password to log in to the
SMTP server.
Kerberos 5 REALM The setting is
user‑defined.
Specify the realm for the Kerberos 5
authentication protocol.
NTLM Domain The setting is
user‑defined.
Specify the domain name for the NTLM
security protocol.
Disable “SMTP server
not set up” error
On
O*
Disable an error message about the SMTP
server setup.
Setup Email Lists and
Alerts
The setting is
user‑defined.
Specify the email addresses and enable
the email alert.
Note: This menu item appears only in
the Embedded Web Server.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 289