Lexmark CX833 - Page 316

Menu item Submenu items Settings Description
Collate N/A O [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Print multiple copies in sequence.
Oset Pages N/A None*
Between Copies
Between Jobs
Oset the output of each print job or each copy
of a print job.
Notes:
• Between Copies
—osets
each copy of a
print job if Collate is set to On [1,2,1,2,1,2]. If
Collate is set to O [1,1,1,2,2,2], then each
set of printed pages is oset, such as all
page 1s and all page 2s.
• Between Jobs—sets the same oset
position for the entire print job regardless of
the number of copies printed.
• This menu item appears only when an
oset stacker or a staple, hole punch
finisher is installed.
Staple N/A O*
1 staple, top left
corner
2 staples, left
1 staple, top right
corner
2 staples, top
1 staple, bottom left
corner
2 staples, bottom
1 staple, bottom
right corner
2 staples, right
4 staples
Specify the staple position for all print jobs.
Note: This menu item appears only when a
staple finisher is installed.
Punch N/A O*
2 holes
3 holes
4 holes
Punch holes on the printed output.
Note: This menu item appears only when a
staple, hole punch, or booklet finisher is
installed.
“Copy from” Size [List of paper sizes] Set the paper size of the original document.
Note: Letter is the U.S. factory default setting.
A4 is the international factory default setting.
“Copy to” Source N/A Tray [x] (1*)
Multipurpose
Feeder
Auto Size Match
Specify the paper source for the copy job.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 316