Lexmark CX833 - Page 318

Menu item Submenu items Settings Description
Advanced Imaging Color Balance Cyan to Red (0*)
Magenta to Green
(0*)
Ye l l o w t o B l u e (0*)
Adjust the color intensity for cyan, magenta, and
yellow.
Color Dropout Color Dropout
(None*)
Default Red
Threshold (128*)
Default Green
Threshold (128*)
Default Blue
Threshold (128*)
Specify which color to drop during scanning, and
adjust the dropout setting for that color.
Auto Color Detect Color Sensitivity
(5*)
Area Sensitivity (5*)
Configure the auto color detection setting.
Contrast Best for content*
0–5
Specify the contrast for the scanned image.
Background
Removal
Background
Detection
(Content‑based*)
Level (0*)
Remove the background color or image noise
from the original document.
Notes:
• Content-based—removes the background
color from the original document .
• Fixed—removes image noise from a photo.
Auto Center O*
On
Align the content at the center of the page.
Mirror Image O*
On
Create a mirror image of the original document.
Negative Image O*
On
Create a negative image of the original
document.
Shadow Detail ‑4 to 4 (0*) Adjust the shadow detail in the original
document.
Scan Edge to Edge O*
On
Scan the original document from edge to edge.
Sharpness 1–5 (3*) Adjust the sharpness of the scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 318