Menu item Submenu item Settings Description
General Fax
Settings
Digits to Mask 0–58 (0*) Specify the number of digits to mask in an
outgoing fax number.
Enable Line
Connected
Detection
O
On*
Determine whether a telephone line is
connected to the printer.
Note: Events are detected immediately.
Enable Line In
Wrong Jack
Detection
O
On*
Determine whether a telephone line is
connected to the correct port on the printer.
Note: Events are detected immediately.
Enable Extension in
Use Support
O
On*
Determine whether a telephone line is used by
another device, such as another phone on the
same line.
Note: Events are detected immediately.
Optimize Fax
Compatibility
The setting is
user‑defined.
Configure the printer fax functionality for optimal
compatibility with other fax machines.
Fax Transport T.38
Analog
G.711
etherFAX
Set the fax transport method.
Note: This menu item appears only if an
etherFAX or Fax over IP (FoIP) license bundle is
installed in the printer.
HTTPS Fax Settings
Note: This menu
appears only if Fax
Transport is set to
etherFAX.
HTTPS service URL The setting is
user‑defined.
Specify the etherFAX service URL.
HTTPS Proxy The setting is
user‑defined.
Specify a proxy server URL.
HTTPS Proxy User The setting is
user‑defined.
Specify the username and password for the
proxy server.
HTTPS Proxy
Password
Fax Send
Encryption
Disabled
Enabled*
Required
Enable encryption for outgoing fax messages.
Fax Receive
Encryption
Disabled
Enabled*
Required
Enable encryption for incoming fax messages.
HTTPS Fax Status
The setting is a
read‑only
information.
Show the etherFAX communication status.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 321
To Next Page
Loading...
