Lexmark CX833 - Page 346

Menu item Submenu item Settings Description
Advanced
Imaging
Color Balance Cyan (0*)
Magenta (0*)
Ye ll ow (0*)
Adjust the color intensity for cyan, magenta, and
yellow.
Color Dropout Color Dropout (None*)
Default Red Threshold
(128*)
Default Green Threshold
(128*)
Default Blue Threshold
(128*)
Specify which color to drop during scanning, and
adjust the dropout setting for that color.
Auto Color
Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
Scan Bit Depth (1 bit*)
Minimum Scan Resolution
(300 dpi*)
Configure the auto color detection setting.
JPEG Quality Best for content*
5–95
Set the JPEG quality of the scanned image.
Contrast Best for content*
0–5
Specify the contrast for the scanned image.
Background
Removal
Background Detection
(Content‑based*)
Level (0*)
Remove the background color or image noise from
the original document.
Mirror Image O*
On
Create a mirror image of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Menu item Submenu item Settings Description
Advanced
Imaging
Negative Image O*
On
Create a negative image of the original
document.
Shadow Detail ‑4 to 4 (0*) Adjust the shadow detail in the scanned image.
Scan Edge to Edge O*
On
Scan the original document from edge to edge.
Sharpness 1–5 (3*) Adjust the sharpness in the scanned image.
Temperature ‑4 to 4 (0*) Generate a bluer or redder output of the original
document.
Blank Pages Blank Page Removal
(Do Not Remove*)
Blank Page Sensitivity
(5*)
Set the sensitivity of scans in relation to blank
pages in the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 346