Menu item Settings Description
Remote Syslog
Facility
0 ‑ Kernel Messages
1 ‑ User‑Level Messages
2 ‑ Mail System
3 ‑ System Daemons
4 ‑ Security/Authorization Messages*
5 ‑ Messages Generated Internally by
Syslogs
6 ‑ Line Printer Subsystem
7 ‑ Network News Subsystem
8 ‑ UUCP Subsystem
9 ‑ Clock Daemon
10 ‑ Security/Authorization Messages
11 ‑ FTP Daemon
12 ‑ NTP Subsystem
13 ‑ Log Audit
14 ‑ Log Alert
15 ‑ Clock Daemon
16 ‑ Local Use 0 (local0)
17‑ Local Use 1 (local1)
18 ‑ Local Use 2 (local2)
19 ‑ Local Use 3 (local3)
20 ‑ Local Use 4 (local4)
21 ‑ Local Use 5 (local5)
22 ‑ Local Use 6 (local6)
23 ‑ Local Use 7 (local7)
Specify a Facility value that the printer uses
when sending log events to the remote syslog
server.
Severity of Events
to Log
0 ‑ Emergency
1 ‑ Alert
2 ‑ Critical
3 ‑ Error
4 ‑ Warning*
5
‑ Notice
6 ‑ Informational
7 ‑ Debug
Specify the severity value of each event.
Remote Syslog
Non‑Logged
Events
O*
On
Set the printer to send any applicable events.
Admin’s Email
Address
The setting is user-defined. Specify the email address of the printer
administrator that are notified of certain log
events.
Email Log Cleared
Alert
O*
On
Set the printer to send an email to the
administrator every time a log is deleted.
Note: An asterisk (*) next to a value indicates the factory default setting.
Printer menus 369
To Next Page
Loading...
