4 Slide the paper guide until it lightly rests against the edge of the paper.
5 To clear the message and continue printing, select Next > > Clear the jam, press OK > .
250 paper jam messages
Error code Description Action
250.02 The input sensor detected a late feed during
a pick retry from the MPF media tray
Go to
“Sensor (input) early arriving jam service check” on
page 85.
250.06 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
250.08 Multifeed detected from MPF, excess media
flushed
Press Continue to print using the next
available media.
Press Continue to print using the next available media.
250.10 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
250.13 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
250.14 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
250.17 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
250.18 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to
“Sensor (input) never-arriving jam from MPF media tray
service check” on page 138.
7463
Diagnostic information
137
To Next Page
Loading...
