Paper type Paper weight 4‑bin mailbox Offset stacker Staple finisher Staple, hole punch
finisher
Preprinted
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Colored paper
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Light paper
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Heavy paper
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Rough/cotton
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
Custom type [x]
90–176 g/m
2
(24–47 lb bond)
XX X X
60–90 g/m
2
(16–24 lb bond)
1
The finisher stacks the paper but does not staple or punch holes in it.
2
Print transparencies in batches of only up to 20 to prevent them from sticking together. For more information, see “Tips
on using transparencies” on page 52.
Data security notice
1 The printer contains various types of memory that store printer and network settings, information from embedded
solutions, and user data.
The following are the types of memory and data that they store.
• Volatile memory—The printer uses standard random access memory (RAM) to buffer user data temporarily
during simple print and copy jobs.
• Non-volatile memory—The printer may use two forms of non-volatile memory: EEPROM and NAND (flash
memory). Both types are used to store the operating system, printer settings, network information, scanner
and bookmark settings, and embedded solutions.
7463
General information
57
To Next Page
Loading...
