Lexmark MX71X - Insert Tray [X]

Insert Tray [x]
Try one or more of the following:
• Insert the specified tray into the printer.
• Cancel the print job.
• Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Install bin [x]
Try one or more of the following:
• Install the specified bin:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the specified bin.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
• Cancel the print job.
• Reset active bin
Install duplex
Try one or more of the following:
• Install the duplex unit:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the duplex unit.
4 Connect the power cord to a properly grounded electrical outlet.
5 Restart the printer.
• Cancel the current job.
• Reset the active bin.
Install Tray [x]
Try one or more of the following:
• Install the specified tray:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the specified tray.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn the printer back on.
• Cancel the print job.
7463
Diagnostic information
223